This elevated 3 bedroom house design has 2 toilet and bath having a floor area of 162 sq.m.. It can be built in a lot with at least 15 meters frontage width and 20 meters length. The minimum lot area would be 300 sq.m. if you want one site firewall, add another 2 meters on the other side if you want this layout to be single detached type house.
House designs with elevated feature are very efficient when it comes to flooding. This house is elevated at 600 mm from the natural ground securing the floor and furnishing from soaking when in time of flooding especially on low lying areas.
With 5 steps, entering the porch the main entrance opens to the living room with 5.4 m by 4 m size or 21.6 sq.m. living area. One the left side is a one-car garage, the only downside of this is that
the garage is not elevated, but since the car can be moved without a problem, the designer just prefer this to be low and in line with the natural ground.
Going into the right side of the floor plan, is the master’s bedroom with 4 m by 4.5 m size, with it’s en-suite toilet and bath and built-in cabinets. Further to the center of the house is hallway
having each side the additional 2 bedrooms with common toilet and bath.
On the rear is the dining with 3.8 m by 3 m size open on the left side will be the kitchen and a storage area. Dining is provided with sliding aluminum glass door opening towards the lanai and
service area. The lanai is a good place to sit or go after a fine dining to relax for a bit. A 5 step stair is also provided as a means of access going to the outside or garage.
Long span galvanized iron roofing with tile effect style on steel roof trusses, accents brick walls, cement plastered finished wall, aluminum sliding and awning windows and doors, wood panel doors are the main finish and features of this 3 bedroom house design.